Temprid Fx and Talstar P have their own benefits when it comes to dealing with insects. While Temprid Fx has a wide range of insects enlisted under its label, with Talstar P you might have to combine it with some other products.
Depending on what you are targeting, you can make a decision from this post.
Quick Overview of Temprid Fx vs Talstar P
|Feature||Temprid Fx||Talstar P|
|Shelf life||3 to 5 years||3 years|
|Residual||Indoor- 90 days
Outdoor- 60 days
|Indoor- 90 days
Outdoor- 60 days
|Dilute||8–16 mm with 1 gallon of water||1 ounce with 1 gallon of water|
|Safe for pets||Yes||Yes|
|Does kill roaches||Yes||Yes|
|Does kill bed bugs||Yes||Yes, but need a supplement.|
|Does kill ants||Yes||Yes, but need a supplement.|
Difference Between Temprid Fx and Talstar P
1. Active Ingredients
Temprid Fx: In Temprid Fx you can find a combination of Beta-cyfluthrin and imidacloprid. This combination is deadly to about 50-plus insects and bugs.
Talstar P: In Talstar P you will find the synthetic pesticide. It is known as bifenthrin. It shows different reactions in different insects and bugs. Sometimes they get killed by touch and sometimes they need a while.
- It kills more than 50 plus species of bugs and insects.
- It can be used both indoors and outdoors.
- You need to use only 8 mm to 16 mm for 1000 sq. Feet.
- It works on ants and bed bugs without any secondary combination.
- The price of Temprid Fx starts at $11, 8mm.
- The product has a longer residual effect.
- It can help you get rid of 75 types of species. But might need to combine with other products.
- It has lower toxicity in pets and humans.
- It doesn’t have plant burn.
- The price of Talstar P starts at $36.61, 16 oz.
How Long Does Temprid Fx Last?
Every product has a shelf life, until which it can perform at its best efficiency level. If you have bought a jar of Temprid Fx and don’t need the whole thing you can use it in the future.
Under proper circumstances, you can preserve a jar of Temprid Fx for about 3 years. This shelf life needs proper preservation methods.
First thing is to preserve the product from extreme temperatures. It goes for both ends. The product cannot be preserved in extremely low temperatures and extremely high temperatures. Its best preservation is the normal room temperature.
Also, you need to store it away from direct sunlight. Direct sunlight can harm the chemical formation of the product. As a result, the product loses its efficiency.
It is important to remember that after you have diluted the Temprid Fx with water, it needs to be used within 24 hours. After 24 hours it will lose its shelf life.
When it comes to the residue, the product has a residue of 90 days indoors and 30 days outdoors. This means after you apply the product it will keep working for the given time period.
How Long Does Talstar P Last?
Alike Temprid Fx, Talstar P has a similar shelf life. With proper care, you can keep it on your shelf for about 3 years. But for this, you need to check the humidity.
Higher humidity of 45% can dilute the product in the jar. Also, it is a must to preserve the upper lid and make the jar airtight. That way you won’t have to worry about the product losing its efficiency.
The ideal preservation temperature is between 60° Fahrenheit to 80° Fahrenheit. Any extreme temperature will detract from the efficiency level.
It is important to keep the product out of direct sunlight. Even when you are diluting the product and not sure if it needs a further reservation, do it under shade. It will ensure product quality in future use.
Once you dilute the product with water, you have to use it before 24 hours. Otherwise, it won’t work. This is because the air dries up the chemical concentration.
When it comes to residual effect, after application you will get its effectiveness for up to 60 days indoors and 90 days outdoors. If there is no rain or snowfall the timeline can increase to 100 to 110 days.
Is Temprid Fx Safe for Pets?
Temprid Fx contains toxic chemicals like Imidacloprid and Beta-Cyfluthrin. The product belongs to the Pyrethroid group. That means it is highly toxic to insects and bugs.
Thus we can safely say that the product is unsafe for pets. But that doesn’t mean you cannot use it indoors or outdoors. Using it properly makes it safe for your pet.
It should be used as a spot spray. After spraying, keep the pets away from the application zone for at least 72 hours. That way, it becomes safe for your pet.
Also, don’t wipe the area after application. Keep the pet food away from the zone during the application.
If you are planning to preserve it for the future then it must be kept away from the pet’s reach.
Is Talstar P Safe for Pets?
The main ingredient of Talstar P is Bifenthrin. It is a highly toxic chemical. And this is used to target pests and insects both indoors and outdoors.
This is a chemical that is not safe for pets if directly consumed. But by using it with proper instruction you can avoid intoxicating your pets.
The first thing to do during the application is to keep your pets away. While applying inside, keep the pet food in a safe place. This must include the utensils that you use to feed your pet.
Once you are done with the application, keep your pets away from the application zone for at least 72 hours. Once the product dries up properly, it becomes safe for the pet to move around.
During these 72 hours, periods try to avoid any watering into the application zone.
Another important notion is if you are planning to preserve the product for further use, keep it on the top shelf, where your pet has no reach. The best is to keep it in a locker.
Does Temprid Fx Kill Roaches?
Temprid Fx is not the sole product for Roach control. But using it can get rid of roach problems in your house.
To control roaches with the help of Temprid Fx you need to apply it indoors following a procedure.
First, dilute 8 mm product in 1 gallon of water for indoor use. Avoid using a metal bucket or tub for making the solution. Try to use a plastic container.
Now use a spray nozzle to apply the product. Use it as a spot application. Using an applicator spray cracks and crevices around the door. It will prevent them from coming back.
Also spray the products in windows, base board, bracks on the floor, under heavy appliances, and all the possible habitats for roaches. This way the roaches get killed and for the next 90 days, they are not coming back to your home for invasion.
Does Talstar P Kill Roaches?
If you have already bought Talstar P, then it is good news for you. Actually, Talstar P is labeled for killing roaches. That means you can easily get rid of roaches with its application.
But doesn’t do the spot killing or killing in contact. After the application, you need to wait for about 72 hours for the roaches to get killed.
The time period depends on the healthiness of the roaches. But it will not extend more than 72 hours.
For this, you need to dilute 1 ounce of the product with 1 gallon of water. Apply the product with a spray nozzle. Don’t spray it all over your place.
Use the product in the attic, cracks in the floor, under furniture and heavy appliances, and door and window cracks.
Even though the product works a bit slowly, it will keep doing its job for about 100 days indoors and 60 days outdoors. And after the product has run out of its efficiency, you can go for a reapplication. This is completely safe.
Does Temprid Fx kill Bed Bugs?
The answer is yes. You can use Temprid Fx to get rid of the bed bugs. For this, you have to balance the concentration of the product.
If you are not intending to use the whole product, then get a spray bottle. Dilute 16 mm of the product with 1 gallon of water. And shake it well to mix it properly.
Once the solution is ready, spray it on your bed mattress. Also, apply the product in all possible places so that the bugs can form a home.
After the application, you will need to wait some hours. The duration can be 24 hours if the situation is severe. Also, let the product dry before you get into your bed.
The product will have its efficiency for up to 90 days. But if you need, you can do a reapplication. This time the bugs are not that much, then try to lower the concentration by using 8 mm with 1 gallon of water.
Does Talstar P Kill Bed Bugs?
Yes, you can use Talstar P to get rid of the bed bugs. But unfortunately, according to the label, only using Talstar P won’t let you get rid of the bed bugs.
In this case, you will need to mix the product with other bed bug kits. You can make a combo of PT Alpine Flea And Bed Bugs, and Cimexa Insecticide Dust with Talstar P.
If you want you can find a whole combo pack under the name of New York Bed Bug Kit online.
This will come with instructions on how to use them. Apply to the mattress and all possible places in your bed and your room. That way you will get full coverage.
The product residue will prevent the bug from coming back for at least 90 days. If you tend to sweep your room frequently, then you might need reapplication after 60 days.
Does Temprid Fx Kill Ants?
If you are looking for a product that will give you long-lasting relief from ants then Temprid Fx can be your always go-to. With this product, you won’t have to worry about buying other subsidized products.
But in case you are targeting to get rid of ants outdoors then you will need to make a concentration of 16 mm product and 1-gallon water.
But in case of indoor problems, you will have to mix 8 mm of the product with 1 gallon of water.
One drawback of Temprid is, after application, you will have to wait for some hours to get rid of the ants. Depending on the severity it can take about 24 hours.
If necessary you can do a reapplication. But once you get rid of the ants, they will not come back for at least 90 days, both indoors and outdoors.
Does Talstar P Kill Ants?
Talstar P is great at killing ants immediately. The toxic chemicals used in Talstar P work immediately on touch. That means after the application you won’t have to worry about waiting to get the desired result.
One major drawback is, if you are targeting to get rid of ant hubs then you need to use other products with Talstar P. The best combination of ant is mixing Termidor SC with Talstar P.
Combine the two products in one is to one ratio. Also, you need to combine them with water. This combination will be carried to the hub by the ants and you will get the result you want.
How to Use Temprid Fx?
While using Temprid Fx you will only need to know a few steps:
Step 1: Take a spraying container. Depending on your necessity choose your desired nozzle.
Step 2: In the container, put about 8mm of product. In case of a severe issue pour 16mm. Before pouring, give the product jar a shake.
Step 3: Introduce 1 gallon of water in the spraying container and give a good mix.
Step 4: Once the mixture is ready, spray it on the target surface. With one gallon of diluted Temprid Fx, you can cover a 1000 sq. feet area.
How to Use Talstar P?
Application of Talstar P is not that difficult. Just take the following steps:
Step 1: Get a hand-spraying container with an adjustable nozzle.
Step 2: In the container take 1 ounce or 30 ml of the product. The product jar comes with an easy measuring system.
Step 3: Introduce 1 gallon of water in the spraying container and give it a good shake.
Step 4: Spray the product on the desired surface. Use a more targeted nozzle for indoor cracks. 1 gallon of the diluted products covers 1000 sq. feet.
Can you mix Temprid Fx and Talstar P?
There is not a really obvious explanation to blend Temprid SC and Talstar P. Talstar P is an engineered pyrethroid and Temprid SC as of now contains a manufactured pyrethroid, so there would not be anything to acquire by combining these items as one. But in severe cases like moving to an old abandoned house you might need to add the mixture.
What happens if you use too much Talstar?
Blending a lot of insect poison like Talstar P is rarely suggested. Over-application can make a region more anti-agents, making bugs keep away from it so the item can’t go about its business.
Is Temprid toxic to humans?
Destructive whenever gulped. Causes moderate eye disturbance. Keep away from contact with skin, eyes, or dress. Wash completely with cleanser and water in the wake of taking care of and before eating, drinking, biting gum, or utilizing tobacco.
Once you get the idea of Temprid Fx Vs Talstar P, you can decide which product to use. Some insecticide companies even mix the two products and apply them in your home.
Wherever you use these products just make sure you have enough protection for children and pets.
Try to keep them away from the application area as much as possible. A 72 hours rest period is the best option.